How To Map & Survey Your Network to Solve Spotty Wi-Fi
A Wi-Fi survey makes it easy to find the spots your signal just doesn’t quite reach.How-To
Everyone likes to complain about the Wi-Fi. It’s too slow, it keeps cutting out in the back bedroom, or your kids can’t get a signal to watch videos on the back deck. If you’re the person who runs your home network, you’ll be the recipient of these complaints, and you’ll want to figure out how to fix them, and quickly.
The first step? Figure out how good your Wi-Fi network really is by doing a Wi-Fi site survey. This is what the pros do, mapping out the signal strength throughout an office to figure out if it reaches where it needs to and what parts need more help.

Image: Richard Baguley
Picture this: your Wi-Fi network is like a giant field with someone standing in the middle occasionally yelling “This is Alice. Who’s out there?” You yell, “Me! Bob!” in response as you walk around. As you move further away, the shouts get quieter and harder to understand. Eventually, if it is a really big field, you might hear the shouts, but not be able to understand them. If you hide behind a fence or a cow, the shouts will be quieter, or might even get scrambled by echoes.
In this metaphor, the person yelling in the middle is your router and their yells are what are called beacon frames where the network identifies itself by name, known as the Service Set Identifier (SSID). The people walking around the field are the Wi-Fi devices trying to connect to it, replying to the beacon frame with their own name in the form of a unique Medium Access Control (MAC) ID. The fences are walls, and the cows are, well, your family, pets, and other things that can block the signal. To further strain the metaphor, there are lots of people yelling for attention all over the field. It is a very noisy field as well. From my desk, for instance, my phone can detect about 20 different Wi-Fi networks, all of which have devices yelling back to connect to them.
So in this field of electrical yelling, how do you figure out how far your network carries? You do a survey, and I suggest you use the UniFi WiFiman app, available for iOS and Android devices. This app is designed to help you connect remotely to a UniFi network, but it can also scan your existing Wi-Fi. It works with routers from all manufacturers (ed. note: mapping can be finicky on certain models of phones and routers) and does the mapping automatically using the Augmented Reality (AR) features of recent iPhone & Android devices. It also records the strength of the Wi-Fi network you are connected to, and combines this with the map to provide a Wi-Fi site survey.
To build the map, install and open the UniFi WiFiman app, connect to your Wi-Fi, then select Signal>Floor plan>create a new scan. Then point the camera at your walls and walk around your house or office until the map is fully filled. As you walk, the app turns the walls into black lines and creates a floor plan overlaid with a heat map that shows the signal strength, from green for strong to red for weak. Here are the survey maps I created for my house. I’ve edited these slightly for clarity and added labels.

Image: Richard Baguley
The two maps are for the two frequency bands my Wi-Fi uses, with the 2.4GHz signal on the left and the 5GHz signal on the right. The colors indicate the signal strength: green is good, yellow is adequate, and red is low. The 2.4GHz signal goes much further than the 5GHz one, but 2.4Ghz is slower, and the signal band is more crowded with other Wi-Fi networks from my neighbors.
A quick note about creating these survey maps, though. If you are using an Android device, the WiFiman app will map all of the frequency bands that your device supports in one pass. On iOS devices, like my iPhone 15 Pro, Apple doesn’t let apps access other Wi-Fi frequency bands; it decides which one to pick. To get around this, I created two networks called Test_2GHz and Test_5GHz on the separate Wi-Fi bands, then mapped each network in turn. iOS also automatically switches to another known network if you lose the signal, so I had to remove all of my known networks to stop it doing this while I was surveying. If that all sounds like too much of a hassle, UniFi offers a $99 device called the WiFiman Wizard that allows iOS devices to scan multiple Wi-Fi frequencies at once, which makes it easier.

Lets iOS devices scan multiple Wi-Fi frequency bands at once, so you can survey 2.4GHz and 5GHz in a single pass.
It’s pretty obvious from this map that my Wi-Fi router is in the middle of the house in the green area, as I installed it in a small alcove in my kitchen. For the 5GHz network, even just a few feet away from the router, the signal strength drops off quickly, barely reaches the back deck, and barely reaches the front of the house. The 2.4GHz network reaches further, staying green through the house. It does reach into the yard and onto the front porch, but the signal strength is very low, so devices will struggle to join the network, or will do so at slower speed. To stretch our metaphor one last time, you can sometimes be understood by the person in the middle of the field if you shout slowly and the wind is in the right direction. But if the wind is in the wrong direction or other people are shouting at the same time, it won’t work.
That means devices at the front or rear of my house send and receive data at a slower speed, or drop on and off the network. I’ve noticed that the video from my UniFi Wi-Fi doorbell (on the front porch, at the bottom of the map) stops every few minutes, only to reappear a few minutes later. After digging into the logs, I realized that it was losing the Wi-Fi connection, and my survey shows me why: it is right at the edge of the yellow area, where the Wi-Fi signal becomes marginal.
So now I know, thanks to a Wi-Fi survey, that my network isn’t getting where I need it. It doesn’t reach the front of the house or provide much coverage for the garden, where I want to install some cameras to see who is sneaking in at night and eating my veggies. In my next article, I’ll show you how I widened the coverage of my Wi-Fi with a mesh network, and how that makes it more useful for everyone.
For now, if you run your own Wi-Fi survey and find spotty or dead zones in your own house, stop into your local Micro Center. We have a wide range of the latest modems, routers, and range extenders, including Ubiquiti. And, if you still need help, one of our knowledgeable associates will be more than happy to help you find the perfect Wi-Fi solution for your needs.
More from MC News
Richard Baguley is a seasoned technology journalist and editor passionate about unraveling the complexities of the digital world. With over three decades of experience, he has established himself as a leading authority on consumer electronics, emerging technologies, and the intersection of tech and society. Richard has contributed to numerous prestigious publications, including PC World, Wired, CNET, T3, Fast Company and many others.
